Leak and crack focus
We concentrate on the weld area and surrounding aluminum so the repair addresses the actual source of the problem.
Call now239-486-0377
Marine-grade aluminum / mobile service
OTW / MARINE / 01
Pontoon leaks found.Cracks repaired. Pressure tested.
Experienced aluminum pontoon repair for leaks, cracks, and damaged components—supported by repeated pressure testing before the job is finished.
Pontoon specialtyCustom work / direct communication
Repair the problem, then verify the repair.
Pontoon work deserves its own process. We evaluate the damage, prepare and weld the repair, then repeat pressure testing as needed to check the result. Mobile service helps keep the project practical for owners and marinas.
Capabilities
- 01Leak detection and repair
- 02Aluminum crack repair
- 03Repeated pressure testing
- 04Structural reinforcement
- 05Rails and ladders
- 06Bimini, bracket, and component fabrication
Pressure-test verification
Testing is repeated as needed after welding to verify the repair before the project is wrapped up.
Beyond the pontoon tube
Rails, ladders, brackets, reinforcement, and other marine aluminum fabrication can be included in the scope.
Build sequenceFrom first call to final walkthrough
Project coordination
A clear path from idea to finished work.
- 01
Contact and assess
Call or text with the issue and location. We gather details and determine the best way to inspect the pontoon.
- 02
Locate and prepare
The damaged or leaking area is identified and prepared for the appropriate aluminum repair.
- 03
Weld and test
The repair is welded, then pressure tested and checked again as needed.
- 04
Review and finish
We review the completed work, clean up, and coordinate any additional marine fabrication.
Naples to North Port / project dependent
Your project starts
with a call to 239-486-0377.
Call Monday–Friday, 8 a.m.–6 p.m. Qualifying after-hours welding may be available.